View LP133X5-A2IB_7780152.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 1 11 1/20 /20/20 /20 specification for approval ( ) preliminary specification (sit entry level) ( ) final specification title 13.3 xga tft lcd buyer name supplier lg. philips lcd model name hoshi-zame 3, 4 model name LP133X5-A2IB signature / date approved by s. h. kang / g.manager date / reviewed by s. c. yoon / s.engineer / prepared by j. c. hong / s.engineer please return 1 copy for our confirmation with your signature and comments. product engineering dept. lcd division lg.philips lcd www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 2 22 2/20 /20/20 /20 contents no. item page - cover 1 - contents 2 - record of revision 3 1. general description 4 2. maximum ratings 5 3. electrical specifications 5 4. optical specifications 6 5. environment 7 6. interface connection 8 7. signal timing specifications 9 8. signal timing wave forms 10 9. color input data reference 11 10. power sequence 12 11. mechanical characteristics 13-14 12. cosmetics 15 13. reliability 16 14. safety 16 15 packaging 16 16. smoke free design 16 17. performance 16 18 precautions 17-18 - appendix 19-20 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 3 33 3/20 /20/20 /20 record of revision date and version description 15/03/99. version 1.0 24/03/99. version 2.0 24/04/99. version 3.0 27/07/99. version 4.0 preliminary specification (dv entry level) preliminary specification (dv entry level) page 5: change of 3. electrical specifications (refer to table 2) module part - power supply input current (i dd ) - ripple/noise - logic input level, low (v il ) - power consumption (p c ) backlight part - lamp start-up voltage page 6: change of 4. optical specifications (refer to table 3) cie color coordinates page 13: change of 11. mechanical specifications weight : 485 10g ? ?? ? 485g(typ.), 500g(max.) preliminary specification (bbfv entry level) page 5: change of 3. electrical specifications (refer to table 2) module part - power supply input current (i dd ) : 0.200a(typ.) ? ?? ? 0.190a(typ.) - power consumption (p c ) : 1.00w(typ.) ? ?? ? 0.95w(typ.) page 6: change of 4. optical specifications (refer to table 3) contrast ratio: 80(min.), 100(typ.) ? ?? ? 100(min.), 200(typ.) preliminary specification (sit entry level) page 5: change of 6. interface connections ( lcm bottom view) page 14: change of 11. mechanical characteristics www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 4 44 4/20 /20/20 /20 1. general description the lg lcd inc. model LP133X5-A2IB lcd is a color a ctive matrix liquid crystal display with an integra l cold cathode fluorescent tube(ccft) back light syst em. the matrix employs a-si thin film transistor a s the active element. it is a transmissive type disp lay operating in the normally white mode. this tft -lcd has a 13.3 inch diagonally measured active display area with xga resolution(768 vertical by 1024 horiz ontal pixel array). each pixel is divided into red, gree n and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-p ixel color is determined with a 6-bit gray scale si gnal for each dot, thus, presenting a palette of 262,144 colors. LP133X5-A2IB has been designed to apply the interfa ce method that enables low power, high speed and lo w emi. flat link must be used as a lvds(low voltage d ifferential signaling) chip. the LP133X5-A2IB lcd is intended to support applica tions where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, t he LP133X5-A2IB characteristics provide an excellent f lat panel display for office automation products su ch as notebook pc. general display characteristics the following are general feature of the model lp 133x5-a2ib lcd; active display area 13.3 inches(33.78c m) diagonal outsize dimensions 292(h) 215(v) 6.5(w) mm(typ.) pixel pitch 0.264 mm 0.264 mm pixel format 1024 horiz. by 768 v ert. pixels rgb stripe arrangement color depth 6-bit, 262,144 colo rs display operating mode transmissive mode, normally white surface treatments hard coating(3h), anti-glare treatment o f the front polarizer source driver circuit gate driver circuit tft-lcd (1024 768) power supply back-light assy cn1 connector cn2 timing control block flat-link interface (lvds) www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 5 55 5/20 /20/20 /20 2. maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1 absolute maximum ratings values parameter symbol min. max. units notes power input voltage operating temperature storage temperature v dd t op t st -0.5 0 -20 +5.5 +50 +60 vdc at 25 flat-link tx 1 note: 1. the relative humidity must not exceed 95 % non-condensing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperature must not exceed 39 . 3. electrical specifications table 2 electrical characteristics parameter symbol values units notes min. typ. max. module: power supply input voltage power supply input current ripple/noise logic input level, high logic input level, low power consumption back light back light input voltage back-light current lamp start-up voltage operating frequency power consumption v dd i dd - v ih v il p c v bl i bl f bl p bl 4.5 - - 2.0 0 - 473 3.0 750 1050 - - 5.0 0.190 - - - 0.95 528 3.8 - - 55 2.00 5.5 0.230 200 v dd +0.3 1.0 1.15 560 7.0 - - - 3.31 vdc a mv vdc vdc watts v rms ma rms v rms v rms khz watts 1 2 2 1 25 2 0 3 notes: 1. the current draw and power consumption specified is for 5.0 vdc at 25 and fv at 60hz. (at black pattern displayed) 2. logic levels are specified for 3.3vdc at flat-link chips, transmitter & receiver. the values specified apply to all logic inputs to flat-link; data ena ble, clock, data signals, etc. 3. the back-light current consumption shown above does not include loss of external inverter. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 6 66 6/20 /20/20 /20 4. optical specifications optical characteristics are determined after the unit has been on and stable for approximately 30 minutes in a dark environment at 25 . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . appendix a presents additional information concern ing the specified characteristics. table 3 optical characteristics parameter symbol values units notes min. typ. max. contrast ratio surface brightness, white brightness variation response time rise time decay time cie color coordinates red green blue white viewing angle x axis, right ( =0o) x axis, left( =180o) y axis, up( =90o) y axis, down ( =270o) flicker cr sb wh sb v tr tr r tr d x r y r x g y g x b y b x w y w x x y y 100 - - - - +40 -40 +10 -30 200 90 150 1.25 30 30 0.540 0.308 0.280 0.533 0.128 0.127 0.282 0.326 - - - - -20 - - 1.45 50 50 0.570 0.338 0.310 0.563 0.158 0.157 0.310 0.346 - - - - -18 cd/m 2 msec 0.600 0.368 0.340 0.593 0.188 0.187 0.338 0.366 degree db 1 (i bl =3.8ma rms ) 2 (i bl =7.0ma rms ) 3 4 5 6 notes 1. contrast ratio (cr) is defined mathematically as : (surface brightness with all white pixels) (surface brightness with all black pixels) 2. surface brightness is the center point across th e lcd surface 50cm from the surface with all pixels displaying white. for more information see append ix a - 1. 3. the variation in surface brightness, sb v is determined by measuring b on at each test position 0 through 9, and then dividing the maximum b on of 9 points luminance by minimum b on of 9 points luminance. for more information see appendix a - 1. sb v maximum (b on1 , b on2 , ....b on9 ) minimum (b on1 , b on2 , ....b on9 ) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r ) and from black to white (decay time, tr d ). for additional information see appendix a - 2. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determine d for the horizontal or x axis and the vertical or y ax is with respect to the z axis which is normal to th e lcd surface. for more information see appendix a - 3 6. when the lcd is refreshed at 60hz rate with the backlight on, there are no noticeable flicker at gr een dot level 31 when the screen is viewed wit h the naked eye. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 7 77 7/20 /20/20 /20 table 4 luminance of grey level gray level luminance (%)(min) luminance (%)(max) l0 0.0 1.4 l7 0.0 2.0 l15 0.0 10.0 l23 3.0 29.0 l31 10.0 53.0 l39 27.0 80.0 l47 51.0 93.0 l55 78.0 100 l63 100 100 5. environment 5.1 altitude : operating 0 - 10,000 feet (3048m ) storage/shipment 0 - 40,000 feet (12192m) 5.2 corrosive gas : use at indoor & outdoor in a bi g city. 5.3 environment test condition no. test item conditions 1 high temperature storage test ta = 60 240h 2 low temperature storage test ta = -20 240h 3 high temperature & high humidity operation test ta = 40 95%rh 240h (no condensation) 4 high temperature operation test ta = 50 240h 5 low temperature operation test ta = 0 240h 6 vibration test (non-operating) sine wave, 10~500~10hz, 1.5g, 0.37oct/min, 3 axis, 1 hour/axis 7 shock test (non-operating) - half sine wave, 100g, 6ms, one shock of each six faces (i.e. run 100g 6ms for all six faces.) - square wave, 50g, 18ms. (for box packaging) {result evaluation criteria} there should be no change which might affect the pr actical display function when the display quality t est is conducted under normal operating condition. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 8 88 8/20 /20/20 /20 6. interface connections interface chip must be used flat-link, part no. th c63lvdm63a(transmitter), kz4e038c12cfp(thc63lvdf64a + timing cont roller) made by thine microsystems,inc. this lcd employs two interface connections, a 20 p in connector is used for the module electronics and two connectors is used for the integral back-light sys tem. the electronics interface connector is a model fi- seb20p manufactured by jae. the pin configuration f or the connector is shown in the table below. table 5 module connector pin configuration (cn1) pin symbol description notes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 vdd vdd return return nc nc gnd a0m a0p gnd a1m a1p gnd a2m a2p gnd clkm clkp gnd nc power (5v) power (5v) ground ground no connection no connection ground difference signal difference signal ground difference signal difference signal ground difference signal difference signal ground difference signal difference signal ground no connection 1. interface chips 1.1 lcd : kz4e038c12cfp 100tq ( thc63lvdf64a +timing controller) 1.2 system : thc63lvdm63a 48tssop * pin to pin compatible with ti lvds 2. connector 2.1 lcd : fi-seb20p-hf13(jae) or 15020-2040(uju electronics) 2.2 system : fi-web21p-hf 2.3 connector pin arrangement 3.pin 3,4: 3.3v option lcm bottom view the back-light interface connector is a model bhsr- 02vs-1, manufactured by jst. the mating connector part number is sm02b-bhss-1 or equivalent. the pin conf iguration for the connector is shown in the table b elow. table 6 back-light connector pin configuration(cn2 ) pin symbol description wire color 1 2 hv lv lamp high voltage input lamp low voltage input pink white 2 1 20 19 fpc cn1 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 9 99 9/20 /20/20 /20 7. signal timing specification(between flat-link an d timing controller this is the signal timing required at the input of the lvds transmitter inside system. all of the in terface signal timing should be satisfied with the following spec ifications for its proper operation. table 7 timing table item symbol min. typ. max. unit note dclk period t clk 14.3 15.4 16.7 ns 65mhz (typ.) set up time t sh 5 - - ns for dclk hold time t hh 5 - - hsync period t hp 1206 1344 1364 t clk width-active t wh 8 136 240 rise/fall time t hr , t hf - - 10 ns set up time t sv 0 - - t clk for hsync hold time t hv 2 - - vsync period t vp 780 806 830 t hp width-active t wv 1 - 24 frame rate v fr 55 60 70 hz rise/fall time t vr , t vf - - 30 ns set up time t si 5 - - ns for dclk hold time t hi 5 - - rise/fall time t ir , t if - - 10 ns dtmg horizontal back porch t hbp 10 - - t clk horizontal front porch t hfp 10 - - vertical back porch t vbp 2 - - t hp vertical front porch t vfp 1 - - data set up time t sd 5 - - ns for dclk hold time t hd 5 - - rise/fall time t dr , t df - - 5 ns www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 10 1010 10/20 /20/20 /20 8. signal timing wave form dclk dclk dclk dclk t tt t hr hrhr hr ,t ,t,t ,t vr, vr, vr, vr, t tt t ir ir ir ir , t , t, t , t dr dr dr dr t tt t hf hfhf hf , t , t, t , t vf, vf, vf, vf, t tt t if ifif if , t , t, t , t df dfdf df hsync, vsync, dtmg, data hsync, vsync, dtmg, data hsync, vsync, dtmg, data hsync, vsync, dtmg, data t tt t clk clk clk clk 0.5v 0.5v 0.5v 0.5v dd dddd dd data data data data dtmg dtmg dtmg dtmg dclk dclk dclk dclk hs hshs hs vs vsvs vs hs hshs hs dtmg dtmg dtmg dtmg vs vsvs vs dtmg dtmg dtmg dtmg t tt t hd hdhd hd t tt t sd sdsd sd v vv v ih ihih ih min. min. min. min. v vv v il ilil il max. max. max. max. t tt t hi hihi hi t tt t si sisi si t tt t hh hhhh hh t tt t sh shsh sh t tt t sv svsv sv t tt t hv hvhv hv t tt t wh whwh wh t tt t hp hphp hp t tt t hfp hfp hfp hfp t tt t hb hbhb hbp pp p t tt t vp vpvp vp t tt t wv wvwv wv t tt t vbp vbp vbp vbp t tt t vfp vfp vfp vfp www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 11 1111 11/20 /20/20 /20 9. color input data reference the brightness of each primary color(red, green a nd blue) is based on the 6-bit gray scale data inpu t for the color; the higher the binary input, the brighter the color . the table below provides a reference for color v ersus data input. table 8 color data reference input color data color red msb lsb green msb lsb blue msb lsb r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red(63) green(63) blue(63) cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 red red(00) dark red(01) red(02) red(61) red(62) red(63) bright 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 green green(00)dark green(01) green(02) green(61) green(62) green(63)bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 blue blue(00) dark blue(01) blue(02) blue(61) blue(62) blue(63) bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 12 1212 12/20 /20/20 /20 10. power on/off sequence notes : 1. please avoid floating state of interfac e signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v dd to 0v. vdd vdd vdd vdd signals signals signals signals lamp on lamp on lamp on lamp on 0v 0v 0v 90% 90% 10% 10% 10% 10% 10% 10% 10ms min 10ms min 10ms min 10ms min 30ms max 30ms max 30ms max 30ms max 0 min 0 min 0 min 0 min 0 min 0 min 0 min 0 min 0 min 0 min 0 min 0 min 170ms min 170ms min 170ms min 170ms min www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 13 1313 13/20 /20/20 /20 11. mechanical characteristics the chart below provides general mechanical charact eristics for the model LP133X5-A2IB lcd. in additi on, the figure below is a detailed mechanical drawing o f the lcd. note that dimension are given for refere nce purposes only. outside dimensions : width 292 mm(typ.) height 215 mm(typ.) thickness 6.5 mm(typ.) active display area : width 270.34 mm height 202.75 mm weight (approximate) : 485g (typ.), 500g(max.) < lcm front side > www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 14 1414 14/20 /20/20 /20 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 15 1515 15/20 /20/20 /20 12. cosmetics this cosmetic inspection is related to the accept ance quality levels of any defects in the lcd modul e which we produce. for more information about the following , contac t lg lcd inc. any time. 12.1 cosmetic inspection conditions 12.1.1 inspective viewing angle - this inspection should be executed according to t he following figure. - viewing angle should be in the range of : q < 45 o when non-operating inspection q < 20 o when operating inspection ( horizontal direction ) q < 10 o when operating inspection ( vertical direction ) 12.1.2 environment conditions - ambient temperature : 25 5 o c - ambient humidity : 65 5 % rh - ambient lumination : using single 20 watts fluo rescent lamp ( about 500 lux ) 35 cm or more tft-lcd module back-light unit viewing zone q q www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 16 1616 16/20 /20/20 /20 13. reliability 13.1 mean time between failure : the lcd panel and interface board assembly (excl uding the ccfts) shall have a mean time between failures of 30,000 hours with a confidence level 9 0%. 3.2 ccfl life(continuous) : the assured ccfl life will be longer than 10,000 hours at the general test condition. (the operating life of the lamp is defined as havin g ended when the illumination of light has reached 50% of the initial value) 13.3 on/off cycle : the display module will be capable of being oper ated over 24,000 on/off cycles (b/l, vdd on/off) 14. safety 14.1 sharp edge : there will be no sharp edges or corners on the disp lay assembly that could cause injury. 14.2 materials 14.2.1 toxicity : there is no carcinogenic material s used anywhere in the display module. 14.2.2 flammability : all components including elec trical components of the module should meet the flammability grade min.ul94-v1. the printed circuit board is made fro m material rated ul94-v1 or better. the actual ul flammability rating is printed on the printed circuit board. 14.2.3 capacitors : if any polarized capacitors are used in the display assembly, provisions will be m ade to keep them from being inserted backwards. 14.2.4 hazardous voltages : any points exceeding 42 .2volts meets the requirement of the limited curren t circuit. the current through a 2 kohm resistance is less tha n 0.7 x f(khz)ma. 15. packaging : the packaging of the lcd meets 75 cm drop test. 16. smoke free design : no smoke or strange smell shall not be observed by the operator as a result of any single failure. 17.performance : all electromagnetic compatibility apply when the display module is attached to the host system. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 17 1717 17/20 /20/20 /20 18.precautions please pay attention to the followings when you u se this tft/lcd module with back-light unit. 18.1 mounting precautions (1) you must mount a module using four holes arran ged in both sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not appli ed to the module. and the case on which a module is moun ted should have sufficient strength so that externa l force is not transmitted directly to the module. (3) please attach the surface with a transparent p rotective plate in order to protect the polarizer l c cell. transparent protective plate should have suffic ient strength in order to resist external force. (4) you should adopt radiation structure to satisf y the temperature specification. (5) acetic acid type and chlorine type materials for th e cover case are not desirable because the former generates corrosive gas of attacking the polalizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers wi th glass, tweezers or anything harder than hb penci l lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface df polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaked with petrolium benzene. normal-h exane is recommended for cleaning the adhesives use d to attach front / rear polarizers. do not use acet one, toluen and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficent strength. (10) do not touch, push the tcp bonding area strongly, b ecause that area is very fragile and sensitive. 18.2 operating precautions (1) the spike noise causes the mis-operation of ci rcuits. it should be lower than following voltage : vdd = 200mv, v1 = 200mv (over and under shoot voltage). (2) response time depends on the temperature. (in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in low er temperature, it becomes lower.) and in lower temperature, response time (requir ed time that brightness is stable after turned on ) becomes longer. (4) be careful for condensation at sudden temperat ure change. condensation makes damage to polarizer or electrical contacted parts. and after fading co ndensation, smear or spot will occur. (5) when fixed patterns are displayed for a long t ime, remnant image is likely to occur. (6) a module has high frequency circuit. if you n eed to shield the electromagnetic noise, please do in yours. (7) when a back-light unit is operating, it sounds . if you need to shield the noise, please do in yo urs. 18.3 electrostatic discharge control since a module is composed of electronic circuits . it is not strong to electrostatic discharge. ma ke certain that treatment persons are connected to ground thr ough wrist band etc . . and dont touch i/f pin di rectly. 18.4 precaution for strong light exposure strong light exposure causes degradation of polar izer and color filter. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 18 1818 18/20 /20/20 /20 18.5 storage when storing modules as spares for a long time. t he following precautions are necessary. (1) store them in a dark place. do not expose the modul e to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in conta ct with any other object. it is recommended that they be stored in the co ntainer in which they were shipped. 18.6 handling precautions for protection film (1) when the protection film is peeled off, static electricity is generated between the film and pola rizer. this should be peeled off slowly and carefully by people who are electrically grounded and with we ll ion- blown equipment or in such a condition, etc.. (2) the protection film is attached to the polariz er with a small amount of glue. if some stress is a pplied to rub the protection film against the polarizer durin g the time you peel off the film, the glue is apt t o remain on the polarizer. please carefully peel off the protection film w ithout rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarizer aft er the protection film is peeled off. (4) you can remove the glue easily. when the glue remai ns on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois s oaked with normal-hexane. 18.7 handling precautions for tcp bonding area (1) please, handle the lcd module with care and dont h old the tcp bonding area strongly, because that are a is very fragile and sensitive. www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 19 1919 19/20 /20/20 /20 a-1 brightness < measuring point for surface brightness > a-2 response time the response time is defined as the following fi gure and shall be measured by switching the input s ignal for black and white. tr r tr d 100 90 10 0 % optical response white black white 512 512512 512 384 384384 384 768 768768 768 512 512512 512 256 256256 256 192 192192 192 2 22 2 4 44 4 8 88 8 6 66 6 3 33 3 1 11 1 384 384384 384 5 55 5 576 576576 576 9 99 9 7 77 7 www.datasheet.net/ datasheet pdf - http://www..co.kr/
lp133x5 lp133x5 lp133x5 lp133x5- -- -a2ib a2ib a2ib a2ib liquid crystal display liquid crystal display liquid crystal display liquid crystal display product specification product specification product specification product specification 10 1010 10- -- -04 0404 04- -- -14 1414 14 page page page page 20 2020 20/20 /20/20 /20 a-3 viewing angle f = 90 (12:00) yu q = 0 z z' yd q f f = 180 (9:00) a f = 0 (3:00) xr f = 270 (6:00) tft lcd module xl www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP133X5-A2IB

	To Download LP133X5-A2IB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .